Best Sale 👏 Btwin, 24 X 1.95 Kids’ Bike Tire ✔️

This tire’s design offers the best balance of features for MTB touring. The pattern of the lugs provides good traction on various types of terrain.

This tire is designed for MTB bikes with 24″ wheels to provide the best balance of features during MTB rides.

How to measure tire wear

To measure the wear on your tires and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the ground you are cycling on and therefore determines your tire’s performance.

A tire needs to be replaced when the center knobs are worn down to the same height as the side knobs.

How to remove a tire

To remove your tire, deflate the inner tube until no more air comes out.
Once deflated, use a tire lever to remove the tire from the rim.

How to fit a tire

Make sure the arrow on the sidewall is pointing in the direction of travel.
To put your tire back on, place the bead (the rigid part that determines the shape of your tire) on the rim.
Once you have done this, inflate your inner tube by approximately 30% before fitting it to the rim (inflating it beforehand reduces the risk of pinching the inner tube).

Next, fit the second bead to the rim, starting at the opposite side to the valve.

How to inflate your tire correctly

Inflate your tire carefully. The recommended pressure is indicated on the side of your tire as well as on its product sheet (available online).
Also, before each outing, make sure that your tires are at the correct pressure for your ride.

Tip from the pros

When inflating your tire, make sure you inflate it to the suitable pressure for the terrain you will be riding on and the weather conditions you will be riding in.
When riding in rainy weather, lower the tire pressure to increase the tire’s grip. On the other hand, when riding in dry weather, you can increase the pressure for better performance. Also, before each outing, make sure that your tires are at the correct pressure for your ride.

Composition

Body : 30.0% Rubber – Synthetic, Body : 30.0% Rubber – Natural Rubber – Latex, Body : 20.0% Steel, Body : 20.0% Polyamide 6

Traction : The knobbly tread structure provides good traction on various types of terrain.

Puncture resistant : Good resistance with the 22 TPI frame.

Efficiency : The structure of the knobs offers very little rolling resistance.

Weight : 1.8 lbs. Stiff bead.

Compatibility : For 24″ inner tubes and wheels.